How To Reset A Westinghouse Tv To Factory Settings

For some reason nearly Westinghouse TVs eventually run into a like problem of simply not turning on.

There are countless cases of Westinghouse Boob tube owners who say they've had this trouble – some say it'southward been an issue they've dealt with for multiple years!

Luckily there is a very like shooting fish in a barrel fix that should resolve about 80% or so of Westinghouse TVs that won't turn on.

Westinghouse Goggle box won't plough on

If your Westinghouse Television set won't turn on you need to reset it. Unplug your Tv set and wait a full 60 seconds. While the TV is unplugged, press and hold the power push for 30 seconds. Later the 60 seconds are upward, plug your Westinghouse TV back in and it should work.

Unplug Westinghouse Goggle box from wall

While this set sounds obvious, unplugging your Westinghouse TV from the wall socket is the most common fashion to get it to turn back on.

The central here is to actually wait the FULL 60 seconds. Take a footling bit of patience and make sure it's been at least a minute before plugging it back in.

While the TV is unplugged, detect and concord the power push button on your Westinghouse TV for xxx seconds. Make certain y'all are belongings the power push on your Goggle box, and not your remote!

This will help to drain any residue power left in the TV and allows the TV to soft reset itself. This is different than simply switching the remote on and off!

Once you plug the Telly back in after the 60 seconds, you lot should meet it ability support no trouble.

While this fix should piece of work for nigh eighty% of cases, the remaining 20% can exist a bit trickier. If you're still having trouble getting your Westinghouse TV to plow back on try the fixes detailed beneath.

Remove batteries from Westinghouse remote

If unplugging and re-plugging your TV in didn't fix the trouble, try taking out your remote batteries.

Make sure to take both batteries completely out of the remote.

Remove batteries from Westinghouse remote

With the batteries removed go on to concord down the power button on the remote for xxx seconds. Again, do this for a full thirty seconds! Non 10 seconds, 30!

After the full xxx seconds are up, put the batteries dorsum in the remote and try to turn on the TV. It should power back on.

You lot might desire to consider putting in a new set of batteries during this footstep only to be sure!

If either of the two steps above fix your Westinghouse TV ability trouble but then a few days or weeks later on you run across the same effect, you'll want to try factory resetting your Telly for a more than permanent solution.

Factory reset Westinghouse TV

With the Telly powered on (hopefully unplugging it or removing the remote batteries was able to temporarily power the TV) click the Dwelling house push on your remote.

Then become to Settings > System > Advanced System Settings > Factory Reset > Factory Reset Everything. Your Television set will plough off and on again so display the initial setup screen.

This volition essentially restore your Westinghouse TV to the settings information technology had on the day you lot purchased the television.

Factory reset Westinghouse Telly without remote

If for whatever reason you practise not have access to your Idiot box'south remote, you tin still factory reset your Westinghouse Television receiver.

Button on side of Boob tube

To do this, find the minor reset push on the back of your Tv set. Depending on the model you have this may be on the right manus side, left hand side, or very lesser of the device.

factory reset westinghouse tv without remote

Get a ballpoint pen and press that reset button for 10-15 seconds. You should see the Westinghouse logo appear on the TV. When yous practise, you can finish pressing the residuum button.

USB keyboard

If you're having trouble finding these buttons on your Tv, or if you Tv is mounted in a tight spot, there are other options.

Kickoff, consider plugging in a USB keyboard directly into the back of your Westinghouse Television set.

You can then use the keyboard to navigate and reset your TV.

Smartphone app

Another option, if you accept a Westinghouse Roku TV, is to download the the Roku app to your smartphone.

Later connecting your TV to the app, you lot can utilize your smart phone as a remote!

Universal Remote

A final possibility is to take hold of a universal remote yous have lying around and enter the advisable Westinghouse lawmaking for the remote to become it working.

At this bespeak you should take fully resolved your power issues but just in case y'all haven't I've included some boosted steps worth trying earlier calling it quits.

Reseat power cord in back of Westinghouse Tv

Another pretty easy potential fix to your power trouble is to unplug the power cord from the back of the TV.

Get out this unplugged for lx seconds or so and and then plug it back in.

When you plug information technology dorsum in make certain that the connexion is snug! You don't want this to exist loose at all – a tight connexion is important to ensure the TV is getting stable power.

With the power cord plugged dorsum in, power on the TV using the Tv power button, non the remote!

Hopefully you meet the TV come dorsum to life.

Select the Correct Input Source

Your Westinghouse Tv set might appear to not plow on because of an incorrect input source.You accept to choose the proper input source for your Television to piece of work correctly.

So whether you lot're using a streaming device, DVD role player, or a cablevision box, double check that your Tv source/input matches the number HDMI port existence used. In the example below, you'd plough the Television receiver to "HDMI 2".

Yous can select the correct input source using two different methods:

Method one – Enable Input Source using a Remote Command

Plough on your TV
Press the Source button on your remote control
Select the desired input mode

Method ii – Change Input Source without Remote Control

Turn on your Boob tube
Printing the Card push button on the side or bottom of the TV
Employ the book button to navigate to the source option
Press the menu push to select the desired input source

Note: Some TVs have a source button at the dorsum or side that you can use to select your preferred input source

Try a unlike power outlet

While unlikely the cause, if you're still having no luck upwardly until this signal so I would endeavour plugging your Westinghouse Goggle box into a dissimilar ability outlet in your home.

Sometimes outlets take a curt or a blown fuse and we merely don't know it.

Alternatively, if you don't want to lug your TV around, yous could simply catch some other smaller appliance and plug information technology into the outlet you lot're trying to use for your TV.

If you run into that device power on and then you know that particular outlet is working and that's probably non your effect.

Again, this is likely not the cause but a worthwhile troubleshooting step that should be quick to eliminate as a suspect.

Backlight is cleaved

If zip has worked to this point it is very possible that the backlight of your Westinghouse Tv set is broken.

An piece of cake mode to determine whether or non this is the case is to power on your Goggle box and then take a flashlight and bring information technology very close to your Telly screen.

Look very closely to run into if there is any epitome on the screen when you flash the light.

If you see a motion-picture show actualization, but it's extremely faint, it's probably because the backlight of your TV failed and it needs to be replaced.

Motherboard is fried

If there was a storm recently, it's possible that your motherboard got fried. Unfortunately, the only way to know for sure is to take the back panelling off of your Westinghouse Television.

Once y'all practice this, you'll see a few boards – the motherboard is usually on the left and the ability board on the right.

To be sure that the issue is not the power lath, you desire to plug your TV in and turn information technology on and then detach the cablevision that links the motherboard to the power board, from the ability board side.

If the TV nonetheless lights up, then you lot know the ability board is fine, and you have a bad motherboard.

Motherboards are pretty inexpensive to replace, but brand sure you get the exact replacement past checking the numbers on the lath itself.

Or, if you're non comfortable doing this yourself, go ahead and have a Television set repairman assist y'all.

If you nevertheless tin't get your Westinghouse TV to turn on, you can try contacting the Westinghouse support team.

You lot can achieve their support hotline at1 (866) 442-7873.

Conclusion

Westinghouse Idiot box's can exist finicky when it comes to power. If your Westinghouse Television won't plough on try these fixes in this order:

Unplug your TV from the wall and await 60 seconds
Remove the batteries from your remote and concur the power button for 30 seconds
Factory reset your TV with or without your remote
Reseat the ability cord in the dorsum of your TV
Brand sure your Television is on the correct input source
Try plugging your TV into a unlike power outlet
Send the TV in for a backlight replacement
Transport the Telly in for a motherboard replacement

If none of these fixes work y'all might desire to pull up your warranty and see if information technology is still valid, otherwise you're stuck buying a new TV.

Let me know if this helped fix your Westinghouse TV. If you establish success doing something else, go out me a comment down beneath!